The Fontaine Magnitude 60LCC is designed for customers operating in regions where spread axle configurations are not required to maximize their trailer loads, the company says.
“If local regulations allow a more concentrated load, this trailer is a great choice,” says Todd Anderson, vice president of sales and marketing.
“It can handle 60 tons without adding a flip box or a spreader. This means our customers get a much lighter trailer setup at a much lower acquisition cost,” Anderson says. “Plus, maneuverability is greatly improved since the overall length is reduced by more than 11 ft., compared to a trailer equipped with a flip box, spreader and fourth axle. With its 60-ton capacity and 18-in. deck height, this trailer is a winner.”
However, should the application require a spread axle configuration, the Magnitude 60LCC is ready and able, the company says. It is designed to accept a 23-in. flip box and a Fontaine EQ1 spreader with a fourth axle. In this configuration, the trailer can haul 55 tons in 16 ft. with a 125-in. swing radius.
The Magnitude 60LCC is built tough and designed to provide years of reliable service, Fontaine says. The trailer boasts a true 26-ft. clear deck length and a loaded deck height of 18 in. with 6 in. of ground clearance. It features the most versatile hydraulic removable gooseneck in the industry; it can be connected and disconnected in a matter of seconds and it can connect/disconnect on uneven ground.
