Alliance Scale has introduced a new truck scale that will dynamically weigh each axle and print a receipt with individual axle weights and the total without requiring a driver to stop.
The Alliance axleWEIGH In Motion Truck Scale weighs individual axles by simply driving over the scale at approximately 3 mph, and also calculates total vehicle weight regardless of truck length or configuration. Easy to use, Alliance says a driver stops at the controller, enters their known tare weight or truck ID to recall a stored tare weight in a single pass, or can use two-pass weighing and the controller will calculate the gross, tare, and net values.
Featuring factory calibrated load cells and a preprogrammed indicator, the Alliance axleWEIGH In Motion Truck Scale yields better than ±0.5 percent repeat-ability on average, the company says. Preconfigured for easy installation, the company says these weighing truck scales can be installed on a gravel driveway, eliminating the need for costly ramps. Suitable for a variety of applications, the controller also can provide a CSV file with job numbers for every transaction.