Bendix announces fall training schedule

Bendix technician checking brake caliper

Bendix will hold in-depth technical training sessions in Indiana, Kentucky, Nevada, Ohio, Pennsylvania, and Texas in the fourth quarter this year.

Bendix says its Air Brake Training class covers the description, operation, and service elements for the total range of components found within dual air brake systems. Topics include fundamentals of compressed air, tactics for air system failure mode diagnosis and troubleshooting, and air brake system and foundation brake components (air compressors, valves, foundation drum brakes, and air disc brakes).

The Advanced Technology Training* class picks up where the Air Brake Training course ends, covering the operation and troubleshooting of higher-level driver assistance and safety systems, as well as diagnostic software.

(Due to the quantity and complexity of the products covered, Bendix highly recommends that each student complete the Bendix Air Brake Training class, or at minimum the online brake school at brake-school.com, before taking the Advanced Technology Training class.)

In addition, the session includes in-depth, hands-on maintenance for Bendix air disc brakes and electrical diagnostics. Systems addressed in the course include:

  • Active Steering by Bendix
  • Antilock Braking Systems (ABS)
  • AutoVue Lane Departure Warning (LDW) System from Bendix CVS
  • Bendix ACom Diagnostics Software
  • Bendix ESP Electronic Stability Program full-stability technology
  • Bendix Wingman Advancedβ„’ and Bendix Wingman Fusion driver assistance systems
  • SafetyDirect by Bendix CVS
  • SmarTire and SmarTire Trailer-Link TPMS by Bendix CVS

Dates and locations of the courses are below: 

Air Brake Training

  • Oct. 10-12: Avon, Ohio – Bendix CVS Headquarters, 35500 Chester Road
  • Oct. 10-12: Sparks, Nevada – Bendix CVS Distribution Center, 1095 Spice Islands Drive, Suite 101
  • Oct. 24-26: Dallas, Texas – Republic Services Technical Institute, 4970 Merrifield Road
  • Oct. 31-November 2: Bowling Green, Kentucky – Bendix Commercial Vehicle Systems, Bowling Green Manufacturing Facility, 346 Central Avenue
  • Nov. 14-16: Hanover, Pennsylvania – R.H. Sheppard Co., Inc., 400 Pine Street
  • Dec. 12-14: Long Beach, California – Universal Technical Institute, 4175 E. Conant Street

Advanced Technology Training

  • Nov. 14-16: Sparks, Nevada – Bendix CVS Distribution Center, 1095 Spice Islands Drive, Suite 101
  • Nov. 28-29: Avon, Ohio – Bendix CVS Headquarters, 35500 Chester Road

Class size for the 2023 in-person Bendix training courses is limited, and enrollment is on a first-come, first-served basis. Bendix says for a full listing of locations and dates, visit bendix.com. The cost for each training class, per attendee, is $475 (U.S.) for Air Brake Training and $425 (U.S.) for Advanced Technology Training.

To register, visit https://bit.ly/BendixTraining2023 or call 1-800-AIR-BRAKE (1-800-247-2725), option 3; by email at [email protected]; or via fax at 216-651-3261.


Learn how to move your used trucks faster
With unsold used inventory depreciating at a rate of more than 2% monthly, efficient inventory turnover is a must for dealers. Download this eBook to access proven strategies for selling used trucks faster.
Download
Used Truck Guide Cover